Kate Miller No Comments

19′ Pivot Entry Door

 

 

Interior view of extremely large pivot door with hardware

 

Case study:

A 55” wide x 19’ tall x 3.25” pivot door. With differing Cedar and oak wood stave skins.

 

Being approached by a client who is in need of a uniquely large pivot door to withstand the difficult climates of Lake Tahoe can seem like a near impossible feat. This pivot door needed to be lightweight for ease of installation and daily use by the client, impact resistant to hold up to everyday use, sound deadening to drown out the hustle and bustle of everything outside

A pivot door built with patented and patent-pending SingCore inside can make anything possible.

Exterior view of oversize pivot door with hardware

Opposing wood species

Dissimilar wood species on the interior and exterior of the door means differing rates of expansion and contraction. SingCore has the strength and stability to remain rigid against the push and pull of the dissimilar skins.

 

Lightweight oversize door

Lightweight

Now let’s take a look at why this door needs to be lightweight.

First off, big pivots doors tend to be very heavy which makes them more difficult to manage, they require custom made specialized hardware and require a lot of maintenance due to the stress that the pivot door adds to the structure.
Secondly a pivot door is only held with two points of contact on the top and bottom of the pivot door; meaning that if the door warps or twists, the door operation will be degraded or completely fail.

A pivot door this size with a solid core will weigh around 800lbs before any skins are added.
Now with SingCore, this door’s weight is a fraction of what other solid pivot doors would have weighed. This weight savings translates into a reduced overall budget by having lower shipping costs, lower hardware cost and lower cost for the labor of the installation.

Adverse climate for keeping oversize pivot doors straight

Ready for any climate
Lake Tahoe is known for its incredible skiing and breathtaking beauty. Not for its temperate climate.

This pivot door will see outside temperatures as low as 4°F while the inside temperature may be a toasty 76°F, which is a 72° difference.
SingCore pivot, sliding, hinge, and pocket door slabs are fully insulated with your choice of recycled EPS foam core (3.5 R value per inch) or urethane foam core (5.7 R value per inch).

Perfectly straight oversize pocket door

Straight
At 19’ tall this pivot door is as big of a challenge as it gets to keep straight.

All door slabs fabricated by SingCore are completely custom. The SingCore team takes into account the finishing, hardware, and climate when building each core. No two doors are alike. And we take great pains to ensure every pivot, sliding, pocket, and hinge door stays within AWI standards.

We love creating one of a kind oversize doors that no one else can.

 

Need help finding hardware for your oversize pivot door?

We recommend https://www.bridgeportworldwide.com/ for all of your large pivot door hardware needs.

 

 

No Comments

Pivot Doors

Pivot doors are what we do best. We specialize in creating the best pivot doors of any size which can be guaranteed not to warp or fail structurally for a full 50 years. Including both single pivot doors and double pivot doors of any style, including French pivot doors.

European pivot doors are larger in size and can be found as dramatic pivot doors inside or outside the home or building. Interior pivot doors generally are not as problematic as exterior doors unless they are oversized pivot doors, then you will probably be looking for a better solution.

European French doors tend to run more oversize and thicker than their American pivot doors. We get calls every day for the most outrageous custom high-end pivot entry doors from the most intriguing contemporary architects and designers around the world.

Whether you or your client is looking for high performance sound isolation pivot doors or advanced safety and security impact pivot doors, Sing Core has the patented lightweight, high strength, sound-deadening, insulated substrate that delivers outstanding results when used in concert with our true flat team cooperating with your engineers of pivot doors.

Pivoting doors are pivot hung doors which contrast wildly from their swinging-hinged counterparts. Depending on the pivot hinge systems in play, your impressive pivot doors, may be very large (even full floor to ceiling) modern pivot doors that instantly commands attention when used as pivoting front doors.

Pivot doors are perfect replacement doors for upgrading or renovating any home, commercial, industrial, or government structure.

Architectural pivot doors are coming more into vogue when used as pivot entry doors due to unleashing the creative aspects of the modern pivot door’s design variances and performance capabilities which are not available in any other lightweight high strength pivot door.

When it comes to metal pivot doors, the biggest and best manufacturers of pivot doors trust Sing Core to provide them with the best substrate materials to build the best aluminum pivot doors, and modern steel pivot doors which can backed up with warranties they could have never afforded when attempting to deliver a long-lasting.

Steel pivot doors tend to weigh too much when manufactured by traditional pivot door companies which causes problems for pivot door maintenance down the road. All your pivot doors with Sing Core are high precision (+/- .006 in.) pivot doors which are custom made in the USA and handcrafted by our highly skilled and crafted True Flat team.

With such high tolerances these high precision pivot door blanks enable to allow builders of concealed pivot doors or completely hidden pivot doors to possess the exacting dimensionally stable material to work with to achieve the near-seamless results they long for.

Sing pivot doors are designed to provide both climate control and sound-deadening characteristics to any project where these unique pivot doors are installed. Keeping in mind that our pivot doors bring full insulation and high strength (660 PSI) which is stronger than steel pound for pound, to the table for the ultimate made in USA pivot doors.

You can now have the most creative pivot doors featuring any flat building materials, such as glass pivot doors, wood pivot doors, fiberglass pivot doors, including exotic hardwoods, for the most rated pivot doors guaranteed to please and not warp for 50 years.

Large pivot doors garner the most attention and create the most problems for maintenance over time, but not if your pivot doors have Sing Core inside.

Generally, you don’t often find Sing Core inside average home pivot doors as they are definitely above the standard fare of traditional pivot door over-the-counter stock as each pivot door created with Sing Core inside is a one-of-a-kind piece of art handcrafted and built for discerning clients in America and abroad.

If you’re contemplating having one of these magnificent pivot doors in your next project, simply contact your favorite retailers of pivot doors and have them contact their pivot door company supplier and ask to have the door you want to have built for you to have, “Sing Core inside.”

Then, you too, can have this same exclusively high-end results in your anything-goes-clad pivot doors.

And nobody can build your custom pivot doors faster than Sing Core who has consistently proven to the high-end door companies who rely on us as their back up, that we can make a thousand doors in better time than most other door manufacturers.
Those for whom we build these co- engineered pivot doors know they can depend on us to have their back even if they are up against a pressing deadline and need rush pivot doors.

Pivot Doors Portfolio

Daniel Sing Core No Comments

Modern Custom Pivot Doors

A pivot door rotates on the floor and top jamb, rather than traditional door side hinges. Here at SingCore, we offer pivot doors of almost any size from standard up to extreme oversize in excess of 30′ and or 30′ wide. These doors have become popular in last few years because they are ideal for large panels. They also have a unique modern look and contemporary vibe.

Pivot Door Configurations

Double Pivot

Our double pivot doors (two doors side by side) are built to swing in, out, but not both. SingCore double pivot doors operate as two beautifully balanced panels. Double pivot doors seem almost like they are floating in space, and are great choice for contractors, millworks, architects or designers that are looking for a greater connection between indoor and outdoor spaces, or a seamless, streamlined modern look. Our custom pivot doors are available in with: side lights, no frames in between, and gang pivot. We also offer multiple pivot doors in a row.

Single Pivot

Single pivot doors can swing in both directions, either in or out. SingCore single pivot doors provide a seamless, streamlined look with smooth operation. Additionally, the door panels function with a much larger width and surface area than a comparable hinge door. Our custom pivot doors are available in with: side lights, no frames in between, and gang pivot. We also offer multiple pivot doors in a row.

Pivot Hardware and Handles

High quality pivot door hardware is engineered for dependability, durability, and smooth operation. SingCore panels are compatible with almost any make and manufacture of pivot door hardware on the market. Every panel comes with custom integrated solid wood blocking installed to your unique design and specifications.

Luxurious openings

Currently being specified by top architects, if you are looking for a luxurious door then pivot doors are for you. And,  the most cutting-edge swing door opening, pivot doors are available from SingCore.

Custom-tailored

Every panel build by SingCore is custom and build directly to your specifications. That means swing in, swing out, or swing in opposite directions can be achievable. Any design that you can imagine could be realized with SingCore’s patented and patent pending door core technology.

Smooth operation

SingCore doors are amazingly strong yet light. This allows for smooth, almost effort free operation. While maintaining the solid look and feel of a door panel that is truly stronger than steel pound for pound. Security, and style can be achieved with a single SingCore door panel.

Material options

Aluminum

Our aluminum pivot doors can be constructed to any hight, and can have a seamless skin have up to 5′ wide. Panels over 5′ wide will have a tight vertical seem every 5′. Aluminum skin doors are suitable for direct exterior use, with proper finishing. They also offer a good substrate for vinyl, paint, or other finish applications.

Steel

SingCore offers both hot rolled and cold rolled steel panels in a wide variety of finishes and applications. Seamless doors are available up to 5’x10′, and doors with tight seams up to any size. Steel doors are suitable for doors with an industrial look, or for commercial and industrial spaces, including sound proof and fire resistant doors.

Wood

Wood skin doors are available in both veneer and wood stave. Our stain grade wood productions can be had in many wood species including including: walnut, mahogany, teak, sapele, cedar, white oak, cherry, fir, pine, and many others. Ask about availability and sizing requirements for your preferred wood variety.

Finish and Color Matching

SingCore uses the highest quality wood species available on the market, enabling our clients to match any custom wood cabinetry. Mahogany, douglas fir, walnut, cherry, alder and many other wood types are often used.

Window Openings

SingCore provides full custom window opening in any style including side light windows, integrated sidelight style, horizontal slat, multiple horizontal slat openings, vertical slat, or any other configuration of you choice.

High Performance

Because SingCore systems are used in extreme environments, including harsh desert heat and frigid cold ski resorts. But, we always offer and almost unheard of 50 year guarantee on all our professional level door panels.

 

Ivan Grantham No Comments

Sing Core’s Affordable Doors

Sing Core’s Affordable Doors: Quality and Savings Combined

Sing Core’s Affordable Doors. At Sing Core, we are thrilled to offer affordable doors like never before. Thanks to our new factory expansion, we’ve made it possible to provide top-quality doors at a much lower cost. If you’re a builder, contractor, or designer, you can now enjoy Sing Core’s unbeatable technology for less.

Sing Core's Affordable Doors

Sing Core’s Affordable Doors

Why Choose Sing Core’s Affordable Doors?

One major reason to choose Sing Core is that our doors are guaranteed to stay warp-free for 50 years. Most doors can’t promise that, but with Sing Core inside, you know your door will last. Plus, with our recent expansion, we’ve created a new line of affordable standard-sized doors that cost much less than custom doors.

Watch the video and see the quality for yourself.

How Do We Keep Prices Low?

Sing Core’s new Class C Division focuses on producing a limited number of standard-sized doors. By specializing in just a few sizes, we are able to reduce costs significantly. Here’s how we make our doors more affordable:

  1. Efficient Manufacturing: Since our new division builds only a set range of door sizes, we can make them much faster and at a lower cost. This means you save over 75% on every door.
  2. Unfinished Doors: All our doors ship in an unfinished state. This lets professional builders and millworks finish them however they like, which also helps keep the price down.
  3. Direct Factory Pricing: Because our doors ship directly from the factory, you avoid extra costs from middlemen. Also, the more doors you order at once, the more you save on shipping and crating costs.

However, it’s important to note that these affordable doors are only available to qualified professionals like custom pivot door builders, millworks, and door companies. They are not sold directly to the public.

Sing Core's Affordable Doors

Sing Core’s Affordable Doors

Standard Sizes, Maximum Savings with Sing Core’s Affordable Doors

All of our Class C doors are 1.75 inches thick, which is a great balance of durability and affordability. Even though they come in set sizes, these doors offer the same quality and performance as our custom doors—but at a much lower price.

Why Choose Sing Core’s Doors?

Sing Core’s doors add a modern, stylish touch to any space. Unlike regular  doors, Sing Core doors swing open smoothly and give your entryway a sleek, high-end look. With Sing Core inside, they are not only beautiful but also strong and lightweight. Plus, they come with the peace of mind that your door won’t warp for 50 years.

Sing Core's Affordable Hinge Door

Sing Core’s Affordable Hinge Door

Affordable Solutions for Any Project

Sing Core’s affordable doors are the best way to get premium-quality doors without overspending. While these doors are not available to the public directly, your builder or millwork specialist can order them and finish them to your specifications. With options like MDF with an unfinished wood look (oak, for example) or paint grade, you have the freedom to create the perfect door for your project.

More importantly, these doors come with Sing Core’s 50-year guarantee against warping, so you can feel confident in your choice.

Affordable Sing Core Doors

Affordable Sing Core Doors

Conclusion: Sing Core’s Affordable Doors – High Quality at a Lower Price

With our affordable doors, Sing Core is making it easier than ever to add stylish, durable doors to your projects. Thanks to our expanded production capabilities, you now get lower costs, top quality, and more options than ever before. Don’t settle for standard hinge doors when you can have affordable doors that not only look amazing but also stay warp-free for 50 years.

Key Benefits:

  • 50-year warp-free guarantee
  • Over 75% savings on doors
  • Direct from factory for best prices
  • 1.75-inch thickness for stability and style
  • Available in standard sizes
  • Customizable finishes for a personal touch
  • Lightweight, durable, and modern

Transform your projects with Sing Core’s affordable doors today. Why pay more for less when you can have the best at a price that fits your budget?

Affordable Sing Core Doors

Affordable Sing Core Doors

Get Pricing HERE

See Standard Pivot Door Widths, and for our large custom pivot door clientele, see our Affordable Pivot Door Evolution of Entrance Doors.

No Comments

Pivot Doors

There’s no better way to make a lasting impression than with a big pivot door. Large pivot doors as entry doors are the best way to garner attention.  Plus your guests will remember and talk about that “big pivot door” long after they’ve visited your home or structure.

Pivot doors make an impact which does not fade quickly. We specialize in working together with the elite high-end millworks and exclusive custom door manufacturers to create breathtaking custom high-end pivot entry doors for the most discerning clients in the United States and abroad.

Specializing in large opening doors is a craft which until recent years presented immense challenges for architects, designers, and engineers when it comes to creating large pivot doors which are taller than eight feet or wider than four feet due to the limitation of the building materials available at the time.

Now, Sing Core presents a pivot door blank which empowers any visionary pivot door company to bring their large pivot door dreams to life. This has ushered in a whole new series of highly individualized one-of-a-kind pivot doors, each one is a specially crafted pivot door which may be similar to, but clearly unlike any other door, making their way into the most exclusive designs and structures around the world.

You can find pivot doors with Sing Core inside just about anywhere from beneath the sea (US Navy) to outer space (NASA) and everywhere in between. This is no surprise when you take into consideration that this is the only way to make large pivot doors which are lightweight, fully insulated, and fully resistant to warp.

Sing Core’s hinged doors and pivot doors are a growing trend among modern door companies, contemporary architecture, and design aficionados who are on the leading edge of the wide range of industries which they represent.

Large pivot entry doors are a symbol of elegant superiority, demanding the attention of anyone who approaches them to focus upon them. There is no hiding their effect on guest who encounter them. It’s hard not to pass through such a large opening without expressing one’s self, with something, like, “Wow.”

Until the advent of Sing Core, the resounding challenge facing pivot door manufacturers was the fact that pivoting doors were warping. Thanks to inventor, Peter Sing, his factory is able to build warp-free pivot door blanks custom-designed and built to host any flat building material. This non-warping substrate enables any pivot door company to build a pivot door that does not warp.

In fact, custom built doors, built in tandem with Sing Core’s true flat team can provide clients with pivot doors which can be guaranteed not to warp, bend, twist, or otherwise fail (including full structure) for 50 years; guaranteed in writing. No other door builder can do that, unless their doors have Sing Core inside.

Unlike hinged doors which are firmly anchored on one side of the door to help prevent warping, pivot doors only have two points of contact where the door swings freely from side to side, in some cases all the way around, pivoting on one anchor point on the doors base and the other on top of the pivoting door.

That’s it. Therefore, it’s very hard to keep pivot doors straight. Sing Core provides pivot doors such as aluminum pivot door and steel pivot doors, but also dares to build and create warp-free versions of wood pivot doors, which are by far the most problematic.

Glass and metal pivot doors provide the least amount of problems, yet architects and designers still specify Sing Core to reduce the weight and increase the insulation value of the metal and glass pivot doors to reduce sound and increase thermal capabilities for the best of all pivot doors available today.

And when it comes to pivot front doors, these pivoting doors can be the perfect solution for doors which face the sun and/or may be fully exposed to the elements. Sing’s modern pivot doors are featured in the most expensive homes and industrial locations, enabling your or your client to possess the most beautiful pivot door system.

Thanks to the true flat team at Sing Core, pivot doors are an excellent choice for addressing those large door openings. Having a guaranteed precision designed and engineered pivot door makes all the difference, especially for those with the highest expectations and attention to detail.

While perusing the pages of sincore.com you will find photos of pivot doors that will challenge your otherwise sound sensibilities, and you will start thinking outside the box as your start to imagine the new possibilities as inspiration for pivot door ideas which you may not have dared to conceive of previously.

You are not limited to using pivot doors as front entry doors because the look and feel of pivot doors can be seen across a variety of settings including used as outdoor pivoting gates made from unique materials including cement gates and pivoting HPL gates.

Specially designed and engineered pivot door, fiberglass and HPL pivot doors are quite common in industrial and hospitality applications where they are exposed to high traffic environments.

Sing Core’s custom-clad pivot doors can host any available flat building material, such as aluminum, brass, brick, cement, cold rolled steel, concrete, diamond plate steel, fiberglass, galvanized steel, FRP, hot rolled steel, HPL, Kevlar, Masonite, MDF, metal, stainless steel, and wood. Any type of wood species.

No Comments

Pivot Door | Stronger than Steel Pivot Door

Introducing the only lightweight high strength pivot door in the world that is guaranteed to be flat and stay flat without warping for 50 years, and youcan get it from your favorite pivot door company.

Pivot door. Stronger than steel pivot door

If you want the best pivot door, you want to make sure your pivot door has a modern design. Any pivot door with Sing Core inside can be made to look like any other pivot door weighing in at hundreds or thousands of pounds more, if itweren’t for this amazing pivot door core technology.

Pivot door architects, designers, and engineers are specifying Sing Core in their modern pivot doors for that extra satisfaction that comes from being able to stand behind your product, even if the pivot door system features a very large pivot door.

All pivot doors made with Sing Core inside are hand crafted pivot doors made to exacting standards with the highest tolerances (+/- .006-inch) for high precision appeal that cannot be found elsewhere among lightweight pivot door cores. Whether specifying a commercial door pivot, industrial custom pivot doors, or high end residential custom entry pivot doors, specifying Sing Core makes all the difference.

True flat large pivot doors can be glass pivot doors, or made of any available wood species, steel and glass doors, steel pivot doors, or any combination of custom entry doors, including large size doors.

Our pivot doors are custom made in the USA by artisans, craftsmen, and engineerswho take pride in their ability to deliver the goods when it comes to warp-freedoors that can be guaranteed not to warp.

Your pivot door is a superb, space saving solution, which can be an excellent way to divide two adjoining spaces. When used as pivoting room dividers, you get the added safety, security, and peace of mind that comes with your pivot door being fully insulated. Your insulated pivot door offers added climate control and sound deadening capabilities which couldn’t be achieved without Sing’s patented and patent-pending pivot door technologies.

Millworks love working with our lightweight MDF pivot door blank because it is lightweight, easy to finish, handle and maneuver around the job site without having to use heavy equipment, greatly reducing handling costs throughout the life of the project. Not to mention the money saved by not having to replace or repair the pivot door over the life of the project.

Pivot hinges can be added to your pivot door project in a variety of ways from edge-pivot-hinged (where the pivot door is hinged on one side only) pivoting door as an alternative to the center pivot hinged door that immediately comes to mind when you think of a traditional pivot door.

Large edge pivot doors can feature a man door (a door within a door) for passthrough without having to open the large pivoting door at all. Edge pivot doors have the advantage of offering the as wide an opening as a side-hinged door but are far more elegant and can host a much thicker pivoting door slab.

Modern steel pivot doors are increasingly in demand and Sing Core offers the best solution to the issue of heavy weight of traditional metal pivoting doors providing a lightweight alternative which provides superior high performance. While providing the lighter weight pivoting steel door, the strength is not compromised because Sing’s pivot door core is stronger than steel (660 PSI+) pound for pound.

Now, you can have a high-quality steel door with excellent protection of impact doors with the soundproofing of sound isolation doors without all the bulk and added weight.

Shouldn’t the next door your get from your favorite pivot door company have Sing Core inside? All you have to do is to have your architect specify Sing Core in your pivot door design, or simply tell your custom pivot door manufacturer that you want, “Sing Core inside,” your pivot door.

Then, and only then, you will have the only pivot door that is guaranteed warp-free for 50 years.

Ian Sage No Comments

Attention Grabbing Large Pivot Doors

When you’re on the hunt for a way to separate your structure from the rest of the pack, a large architectural pivot door can be the most memorable feature of your project. If attention grabbing large pivot doors aren’t the only thing remembered by visitors, it is definitely the first order of impact capturing the imagination of anyone who encounters large pivot entry doors.

The size of your large pivot doors need not be limited to the limitations of available building materials. If your large pivot door is presenting a problem with translating from what you see in your mind’s eye to the real world, Sing Core offers the solution to build the largest pivot doors made of any available flat building material due to its unfailing and anti-warp substrate.

Large pivot doors with Sing Core inside are used in the most strenuous circumstances from elegant architectural pivoting front doors used as the main point of entry to the multi-million-dollar homes of billionaires to the most impressive architectural pivot doors found in the most modern and contemporary industrial applications.

The patented and patent pending Sing Core pivot door substrate help to bring your large pivot door ideas to life by providing an insulated base material which is lightweight and stronger than steel pound for pound.

 

 

Add to these features patented Eco-friendly anti-warp technologies which result in pivot doors as amazing options to upgrade and enhance any structure that can be guaranteed not to warp-, bend, twist, or otherwise fail for fifty years.

With the growing emphasis on pivot doors, metal pivot doors, such as aluminum, brass, copper, and steel pivot doors, including but not limited to cold rolled steel pivot doors, diamond plate steel pivot doors, galvanized steel pivot doors, hot rolled steel pivot doors, and stainless-steel pivot doors, just to name a few.

When you’re working with Sing Core, you’re not limiting yourself to a selection of large exterior pivot door styles, colors, or material because each large pivot door that has Sing Core inside is a one-of-a-kind individually unique piece of art, which can be made of any available flat building material.

As you already know, your artistic contemporary architectural pivot doors are not limited to pivot hung doors which feature a center pivot because you can basically have the pivot point inserted at any point along the width of the door giving you more control over your pivot door’s articulation.

Modern pivot door trends feature horizontal natural wood which presents the greatest number of challenges for pivot door designers and engineers due to warping pivot doors.

Wood pivot doors are not a problem for Sing Core because we are the only provider of patented pivot door core which enables the door companies, millworks, and custom door manufacturers to deliver a large wooden pivot door to their clients with a full 50-year warp-free guarantee which includes a full structure warranty.

No large pivot door company in the world can offer an Eco-friendly lightweight high-strength, fully insulated architectural pivot door with a 50-year warp-free guarantee, unless it has Sing Core inside.

Modern architectural trends are demanding their high-end clientele raise the bar on architectural pivot doors which are oversized as Sing Core is more and more likely to be featured in spec’s increasingly.

The most demanding upscale end users who desire the exclusively predominant superiority of having only the best architectural doors in the industry say they want their exotic pivot doors to have sing core inside.

Take a look at these pictures of large pivot door which represent images of some of the best large pivot doors in service today. With large pivot doors the variety of options available to the most creative architects, engineers, and designers worldwide, you will find pivot doors with Sing Core inside in use as hurricane resistant* pivot doors, large impact pivot doors, high-end security doors, climate control pivot doors, weatherproof exterior doors, and as sound proof pivot doors.

*Customer will need to perform lab tests to certify hurricane rating for local code compliance.

Ian Sage No Comments

Pivot Door | Pivot Door

Sing Core’s Pivot Door

Sing Core's Pivot Door

Sing Core’s Pivot Door

A Pivot Door is one of the most significant features in contemporary architecture. When contemplating your design, contemplate Sing Core’s Pivot Door. Sing Core builds the premier lightweight fully insulated and sound-deadening Pivot Door. This is the perfect Pivot Door for your new construction or remodel. 

A pivot door for your main entryway makes a statement to your visitors. It’s the first thing people see before they enter your home. It also creates curb appeal like no other. 

Get the most impact from your pivot door, choose Sing Core! Sing Core’s custom design means your pivot door is built impressively tall, wide, or lightweight. With Sing Core, your home is sure to impress. A quality pivot door makes a statement from a distance. 

How large to build your pivot door? The answer is resounding. “As large as possible!” A bigger pivot door leaves a bigger impression! It’s not uncommon for Sing Core pivot doors to stretch from the floor to the ceiling. With our lightweight core, this size is feasible. Choose a front door that’s sure to grab attention!

Pivot Door

Pivot Door

How to Design a Pivot Door

Your pivot door is only limited by your imagination! Sing Core is compatible with any flat building material. With complete customization, you can let your creativity fly! 

Consider your material choice. Consider the weight. Heavier materials make create strain on larger doors. This is especially true when the door is over 8 feet tall or 3.5 feet wide. That’s why Sing Core’s patented lightweight core technology is so important. We have flexibility with our fully insulated lightweight core.

Extra weight can create problems installing your pivot door. Weight is a burden on your door hardware, leading to replacement costs. With Sing Core, your door will remain dimensionally stable and won’t warp, regardless of size.

Will your Pivot Door delaminate, warp, bend, or twist?

Is your large door guaranteed?

In most cases, your large pivot door is excluded from warranty. They’re afraid that your large door might fail. Your door won’t fail with Sing Core! We’re backed by our 50-year Pivot Door Guarantee. 

50-year Door Guarantee

Sing Core’s True Flat Team and your favorite millwork can create a custom pivot door! This Pivot Door is guaranteed to last half a century. Not warping, bending, or twisting. 

 

How to Spec a Pivot Door

Best way to spec your large pivot door is to note that it has to have, “Sing Core inside.”

Sing Core works hand in hand with millworks and custom pivot door manufacturers to create the ultimate pivot door. It starts with Sing Core inside. 

Sing Core is a revolutionary pivot door core. Patented and patent-pending technology created by inventor Peter Sing. The core is a reinforced torsion box, creating a solid composite structure. Lightweight Sing Pivot Doors are insulated, sound-deadening, and custom built. 

Get an Estimate

Visit https://singcore.com/pricing-3/get-an-estimate and get an estimate for your next Door! 

See also: Affordable Pivot Door Evolution

No Comments

Google Best Pivot Door

If you want to find the best door in the world for you next project all you need to do is to use the best tool for finding the best doors, such as:

Google search pivot door

Google search pivot door

If you’re looking for the what constitutes the best doors, then you might search for the most expensive door. You will find that the door companies which can make the most expensive doors which outperform all other doors in terms of weight, strength, and longevity are the hardest to make. That is, unless you know the secret.

Best Door Secret

Pivot doors are problematic because they only have two points of contact whereby the pivot door is operated and anchored by the pivot door hinges.

Hinge doors can be secured by multiple hinges, even a full length piano hinge which anchors one whole side of the door completely. Even so, with one side fully anchored, a large door will warp, bend, twist or cup, causing it to fail. A warped door will compromise the door seal and may not be able to allow the door latch to secure properly.

High End Pivot Doors

Pivot doors rely only on those two pivot points, one on the top of the door, and the other opposite it on the bottom of the door. It is imperative for a functioning pivot door to remain straight and true, or else you cannot operate it properly.

Only the best pivot door companies can make a high-end pivot door which can perform over time without failing due to door warp.

50-year Warp-free Guarantee

All you have to do, is to contact the top pivot door manufacturers on your search results and ask them if they offer a large pivot door with a 50-year guarantee.

If they do, these doors will all have Sing Core inside.

With Sing Core inside your pivot door, it will be lightweight (a fraction the weight of other solid core pivot doors), and high-strength (at 660+ PSI, stronger than steel pound-for-pound).

9 ft wide warp -free weatherproof pivot door

9 ft wide warp -free weatherproof pivot door

You also have the added benefit of having a pivot door which is fully insulated for climate control and sound deadening capabilities (Sing Core can be found inside the most efficient soundproof doors in the world).

You Can Laugh or Cry

When you discover the secret of the most expensive high-end doors, you might start to laugh, but before you start laughing, think about this:

You might be crying, if you make the wrong decision, and find yourself in possession of a weak door which may fail prior to when you might have expected.

This is why most large door manufacturers will exclude large doors (over 7 ft tall and 3.5 ft wide) in the door schedule from the warranty following installation. Chances are they will start to fail at the next change of season.

21 ft tall aluminum pivot door

Then you might reason (as many have) that if Sing Core can make the best doors in the world the most valuable doors in the world, then Sing Core could make anything better, and it does.

Doors and So Much More

Entire homes have been made of Sing Core, which is available in post and beam and panel formats, changing the way homes are built, including all the interior and furniture inside a Sing home.

Sing Core makes everything better and its Eco-friendly nature makes everything more sustainable over time.

Guaranteed for 50 years but built to last centuries