Ian Sage No Comments

Dual Pocket Doors Made with Sing Core

People often think of doors as simple barriers or entryways, but at Sing Core, we know that a door can be much more than that. Doors can be elegant accents to a room’s design, or a seamless way to change a room’s layout. If done right, they can even be part of a room’s main design feature, such as in the example we’re showing you today.

This customer needed a way to separate two areas of the house, but was fairly limited in their options due to their design preference. Due to the height of the room, a standard door would not work unless they expanded on the center wall, which would majorly damage the flow and beauty of the room. A normal sliding door would work, but the dimensions would be incredibly difficult to get right. The door would have to be incredibly tall, yet narrow, which would need to be custom made. If this was done with traditional materials, the doors would likely be too heavy to work reliably, and could damage their hardware. Sing Core, however, was a great solution.

Because Sing Core panels are made with a honeycomb core, they are incredibly lightweight, yet still very strong. This means that the custom doors would still be sturdy and long lasting, but due to their low weight, they’d also be easy to use and be far less likely to damage their hardware. In fact, each of these doors only weigh 200 pounds, despite being over 13 feet tall.

These twin pocket doors measure 40 inches wide by 158 inches tall, and are 2.5 inches thick. This tall and narrow design worked beautifully for the room, though is definitely a non-standard size. Getting a door like this without having it custom made would be impossible, but luckily Sing Core specializes in large, high end custom doors.

A Sing Core door can be ordered to nearly any shape or size, and are strong, lightweight, and durable. One major concern with large doors is the possibility of warping, which gets exponentially more likely, and often exponentially worse, with larger doors. In the case of this project, even just a slight warp could ruin the entire system. A little bend or twist could leave a door stuck in its pocket, or scraping the side as it is opened and closed, damaging both the door and the wall nearby. There are many ways a warp can hinder or ruin a door, and often, warps are irrecoverable. Sing Core doors are guaranteed to never warp, and we can make that claim due to our innovative and patented honeycomb core. In fact, each door panel comes with a 50 Year Warp-Free and Structural Guarantee, so you can rest easy without worrying about your door failing on you.

Sing Core is thrilled to have had the chance to work on this beautiful project, and we hope to work on your next amazing project with you. Submit a quote request on our website to learn what we can do for you!

Ian Sage No Comments

Overcoming the Challenges of Custom Shaped Doors

Doors are not just functional elements in our homes and buildings; they are also essential design features that add character and aesthetic appeal. As architectural styles evolve and become more intricate, the demand for uniquely shaped doors has increased. However, crafting such doors presents a multitude of challenges for manufacturers. In this article, we will explore the difficulties of making shaped doors and how Sing Core can overcome these challenges.

Complex Shapes and Structural Integrity

One of the primary challenges in creating shaped doors is maintaining structural integrity while accommodating intricate designs. Traditional door materials such as solid wood or fiberglass often struggle to retain their shape and stability when subjected to unusual configurations. As a result, manufacturers face limitations in terms of design possibilities.

Sing Core, on the other hand, does no have these limitations. Composed of a lightweight yet incredibly strong honeycomb core, Sing Core has remarkable stability, even in complex shapes. Its unique construction incorporates a torsion box grid structure that ensures optimal strength, rigidity, and dimensional stability. This characteristic allows for the creation of doors with elaborate curves, arches, and other non-standard shapes.

Weight and Handling Issues

Another significant challenge in crafting shaped doors lies in their weight and the subsequent handling difficulties. Traditional materials used for door construction, such as solid wood or metal, can be heavy and unwieldy. This poses challenges during installation, transportation, and everyday use.

Sing Core panels address this issue by being exceptionally lightweight while maintaining their structural integrity. By utilizing a combination of advanced composite materials and a honeycomb grid core, Sing Core achieves an impressive strength-to-weight ratio. As a result, shaped doors made with Sing Core are significantly lighter than their traditional counterparts, making them easier to handle and reducing strain during installation.

Warping and Moisture Resistance

Traditional doors, especially those made of solid wood, are prone to warping and distortion when exposed to fluctuations in temperature and humidity. This is a persistent challenge for shaped doors, as the irregular surfaces and edges increase the potential for warping.

Sing Core panels, however, are guaranteed to be warp-free. Their high quality design and strong core eliminates the risk of warping and distortion. The honeycomb core of Sing Core also plays a vital role in maintaining dimensional stability over time. This ensures that shaped doors retain their intended form, even in challenging environmental conditions. In addition, all Sing Core panels come with a 50 Year Warp-Free and Structural Guarantee, so you can trust our panels to hold strong for many years to come.

Precision and Customization

Crafting shaped doors requires precise measurements, intricate detailing, and customization to meet specific design requirements. Traditional manufacturing methods often struggle to achieve the necessary precision, leading to inconsistencies and compromises in the final product.

Sing Core panels can be completely customized and are made with the necessary precision to meet the unique specifications of any design. This level of customization allows for the creation of truly one-of-a-kind shaped doors that fulfill the vision of architects, designers, and homeowners.

Conclusion

The challenges of creating shaped doors are significant, but with Sing Core, the industry has found a game-changing solution. By combining remarkable strength, lightweight construction, warp resistance, and precise customization capabilities, Sing Core panels enable the production of stunning shaped doors that were once thought to be impractical or unattainable. As architectural designs continue to push boundaries, Sing Core proves to be an invaluable asset in meeting the demands of modern construction and design, revolutionizing the industry in the process.

Ian Sage No Comments

Improve Your Client’s Business Space with Sing Core

In the realm of architecture and design, the pursuit of innovation and efficiency is paramount. To cater to the evolving needs of modern businesses, architects are constantly seeking ways to upgrade office spaces, enhancing functionality, aesthetics, and overall productivity. One useful material in this aspect is Sing Core, a revolutionary material that offers unparalleled versatility and durability. In this article, we will explore how architects can harness the power of Sing Core to upgrade their business clients’ offices, creating spaces that inspire and support success.

Reinventing Interior Layouts

One of the primary challenges architects face when upgrading office spaces is modifying existing layouts to accommodate changing requirements. With Sing Core, architects gain the freedom to redefine interior spaces effortlessly. This lightweight yet incredibly strong material can be used to create movable walls, partitions, and modular systems. By leveraging the flexibility of Sing Core, architects can transform large open areas into smaller workstations or meeting rooms, ensuring optimal space utilization and privacy while maintaining a seamless and aesthetically pleasing environment.

Enhancing Acoustic Performance

Noise pollution can significantly impact employee focus and productivity. Architects can utilize Sing Core to address acoustic challenges and create a serene and productive work atmosphere. Sing Core’s unique construction, featuring an insulated honeycomb core, acts as a sound barrier, effectively reducing noise transmission between different areas of the office. By incorporating Sing Core panels into doors, walls, or other office components, architects can design spaces that promote concentration and collaboration, ultimately benefiting the overall performance of the business.

Creating Inviting Reception Areas

A welcoming and visually striking reception area leaves a lasting impression on clients and visitors. Sing Core can help architects elevate the design of these crucial spaces. With the variety of options and customizability, architects can utilize Sing Core to make beautiful entryways and doors, awe inspiring structures, and more. The material’s ability to accommodate various finishes and veneers also allows architects to unleash their creativity and craft stunning focal points that reflect the business’s brand identity.

Incorporating Sustainable Elements

As sustainability becomes increasingly vital in architectural design, Sing Core provides architects with an eco-friendly solution for office upgrades. Sing Core is manufactured using sustainable materials and techniques, making it an environmentally conscious choice. Furthermore, the material’s high strength-to-weight ratio reduces the need for excessive structural supports, minimizing the consumption of additional resources. By incorporating Sing Core into office renovations, architects can contribute to a greener future while ensuring their clients’ spaces are in line with sustainable practices.

Conclusion

Architects play a crucial role in transforming office spaces into efficient, visually pleasing, and productive environments. By harnessing the potential of Sing Core, these professionals can upgrade their business clients’ offices with remarkable ease and creativity. From flexible interior layouts to functional workstations, enhanced acoustics to inviting reception areas, and sustainable designs, Sing Core offers a wealth of possibilities for architectural upgrades. Embracing this innovative material empowers architects to unlock new realms of design, ultimately shaping workspaces that inspire and support business success in the ever-evolving corporate landscape

Ian Sage No Comments

The Ultimate Choice for Large Industrial Doors

When it comes to large industrial doors, choosing the right material is crucial for architects and construction professionals. These doors must withstand heavy usage, harsh environments, and demanding performance requirements. Sing Core has emerged as the best choice for large industrial doors, offering unmatched strength, durability, and a range of benefits that set it apart from other options in the market. In this article, we will explore why Sing Core stands out as the ultimate choice for architects and construction professionals when it comes to large industrial doors.

Unparalleled Strength and Durability

Sing Core’s superiority lies in its exceptional strength and durability. Large industrial doors constructed with Sing Core are designed to withstand the toughest conditions, maintaining their structural integrity over time. The honeycomb core is made with high grade hardwood and insulation, creating a solid foundation that can withstand immense pressure and resist warping. This remarkable strength ensures that the doors remain robust and reliable even in the face of heavy use and challenging environments.

Lightweight Design, Enhanced Efficiency

Despite their outstanding strength, Sing Core doors are surprisingly lightweight. This advantage revolutionizes the installation process, reducing strain on door hardware and making handling and transportation significantly easier. Furthermore, a lighter door is easier to use once installed, especially in the case of large industrial doors. Massive metal sliding doors can be a pain to open and close, but with Sing Core, the door would still be easy and smooth to operate.

Unmatched Insulation Properties

Energy efficiency is a top priority for industrial and commercial applications, and Sing Core excels in this aspect. These doors incorporate exceptional insulation properties, reducing heat transfer and improving energy efficiency. The honeycomb core within Sing Core doors acts as a powerful insulator, maintaining stable interior temperatures and minimizing heat loss or gain. This insulation prowess ensures optimal energy efficiency in industrial spaces, reducing reliance on climate control systems and lowering energy costs in the long run.

Customization for Optimal Design

Every architectural project is unique, demanding doors that fit specific design requirements. Sing Core understands this need and offers extensive customization options. Architects and construction professionals can tailor the size, shape, and finish of the doors to match their vision precisely. This level of customization ensures seamless integration of the doors into the overall design aesthetic, enhancing the visual appeal and functionality of the industrial space. Sing Core’s commitment to customization allows professionals to achieve their design goals while maintaining the exceptional quality and performance the brand is known for.

Versatility and Adaptability

Sing Core’s versatility extends beyond large industrial doors. The innovative core technology can be applied to various architectural elements, including partitions, wall panels, ceilings, and more. This adaptability allows designers to create cohesive and visually appealing spaces with consistent quality throughout. By utilizing Sing Core for multiple applications, professionals can streamline the sourcing process and maintain design consistency across projects, further enhancing efficiency and ensuring an excellent end result.

Conclusion

When it comes to large industrial doors, Sing Core reigns supreme as the ultimate choice for architects and construction professionals. With its unparalleled strength, durability, lightweight design, energy efficiency, customization options, and versatility, Sing Core offers a comprehensive solution that outperforms conventional alternatives. By selecting Sing Core for large industrial doors, professionals can ensure optimal performance, longevity, and aesthetic appeal for industrial spaces. Sing Core’s commitment to innovation and excellence solidifies its position as the top choice for architects and construction professionals seeking to deliver outstanding results in large industrial door construction.

Ian Sage No Comments

New Park Opens With 10 Sing Core Doors

Charleston, South Carolina recently held a ribbon cutting ceremony for their new park, Carr-Richardson park. The park features a mid-sized structure for community gatherings, and the amazing builders of this project decided to use Sing Core for the doors.

The structure features 10 total Sing Core doors, all of which are beautiful artisan grade sliding doors. 2 doors measure 53 inches by 121 inches, while 8 of them are 79.5 inches by 121 inches, making these overall quite large doors.

To the right is one of the shop drawings used in the concept creation process of these doors.

The park went with Sing Core for a few reasons, one of which being the size of the panels they needed. Traditional panels of this size would be incredibly heavy, and if they weren’t, they would have to sacrifice strength in order to shed some weight. Sing Core panels are both lightweight and strong thanks to the patented honeycomb core used inside.

The doors can be seen all around the building, mainly near the numerous glass windows it has. These doors are attached to rollers above the windows, and intended to slide over and cover them when needed. This could be handy for protecting the windows from severe weather, potential break ins and vandalization, and more.

Sing Core panels are also a great choice for this feature, as their inherent strength and impact resistance allows them to protect the building for many years to come.

The architect that the city consulted for the job was Liollio Architecture and the construction was contracted through Mashburn Construction, both of which are local to South Carolina. Liollio did an amazing job with the designing of this park, and Mashburn’s construction and installation of the doors was incredible. Beautiful end results like this simply aren’t possible without amazing designers and construction professionals.

An article talking about the park was written after its grand opening, which you can read here.

We are thrilled to have been a part of this project, and are tremendously grateful for the business and support of the teams involved in creating this park. Sing Core takes great pride in public projects such as this, as it allows us an opportunity to give to the community and encourage more people-first projects.

If you’re working on designing or constructing a park, building, or other public place, consider using Sing Core for the best doors on the market. You can learn more about the applications of Sing Core in public places here.

Ian Sage No Comments

Large Doors by Sing Core

We often mention how amazing Sing Core is for making large, or even massive doors. However, what kind of claim would that be if we couldn’t back it up with proof? In this article we will go over three amazing and massive doors that were made possible by Sing Core, as well as why Sing Core panels are the best, and often the only choice to make large doors possible.

Laserfiche Dual Sliding Doors

The first example of large doors we’ll cover is a set of two sliding doors made for the Laserfiche headquarters in California. The largest of these doors is 102 inches tall by 118 inches wide, or 8.5 feet tall by 9.8 feet wide. The designers and installation crew did an amazing job with these beautiful doors, especially given their unique case of closing off the corner of the room as opposed to a more traditional sliding door setup. You can read more about this project here.

University of Idaho Arena Door

Another recent project that yielded a massive and gorgeous door was this crowd control door for the Idaho Central Arena. This large door measures in at 89.5 inches tall and 120.5 inches wide, or approximately 7.5 feet tall by 10 feet wide. This door acts as both an access point and a traffic control mechanism. When closed, this door simply seals off an area, but by opening it and positioning it as desired, you can divert the massive crowds within the arena onto a new route. Due to its use in a high traffic area, it also needs to be more sturdy and durable than a traditional door, which was made easy with Sing Core. You can read more about this project here.

Giant Pink Door

Though we’ve shown this door off before, it simply can’t be left off of this list. It is a perfect example of a large custom door that simply would not have been possible without Sing Core. This door is 156 inches tall by 36 inches wide, or 13 feet tall by 3 feet wide. In addition to this door’s unique and massive size, it also needed one key feature of Sing Core panels: to be lightweight. This door, unlike most large doors, is mounted on hinges. Typically large doors use rollers or a pivot mechanism, however not this one. As such, it had to be incredibly lightweight for its size, as hinges are far more likely to bend, break, or otherwise develop problems if they are supporting a lot of weight. This door, like all Sing Core doors, is very light compared to traditional options, and yet sacrifices none of the strength.

There are many reasons why you may want to use Sing Core for your large doors, but ultimately what makes our product special is its superior strength, high quality, and low weight. In addition, our panels will never warp or bend, which large doors are especially prone to. Warping is a quick way to permanently ruin a door, but with Sing Core, you can rest easy knowing that it will never happen. In fact, we offer a 50 Year Warp-Free Guarantee as a testament to that fact.

Use Sing Core for your large custom doors, and witness the difference and ease as a result!

Ian Sage No Comments

Pivot Doors in Commercial Builds

When it comes to commercial buildings, the choice of doors can play a critical role in the overall functionality and design of the space. One type of door that is immensely popular in the architecture industry is the pivot door. Pivot doors offer several benefits that make them an attractive choice for a range of commercial applications, from storefronts and galleries to hotels and offices. In this article, we’ll explore some of the different uses for pivot doors in commercial buildings and how Sing Core can help you achieve the perfect look and functionality for your space.

First, let’s take a look at what makes pivot doors so appealing. Unlike traditional hinged doors that swing on a set of hinges, pivot doors are anchored at the top and bottom, allowing them to rotate smoothly on a fixed pivot point. This design allows for larger and heavier doors to be used, while still maintaining ease of operation. Pivot doors are also known for their sleek, modern look, with clean lines and minimal hardware that create a contemporary feel.

One common use for pivot doors in the commercial scene is as a store entrance. Pivot doors can create an impressive and welcoming entrance for customers, while also allowing for easy accessibility. Additionally, the larger size and unique possibilities of pivot doors can help to make a small storefront appear more spacious and inviting. With Sing Core’s expertise in custom door design, you can choose from a variety of finishes and styles to create a unique entrance that reflects your brand’s aesthetic.

Another popular feature of pivot doors in commercial applications is the possibilities when it comes to size. Pivot doors, unlike hinged doors, can be massive without having to worry about breaking hardware. Pivot doors often make use of much more durable hardware that their hinged counterparts, and by mounting them from the top and bottom you are securing it in a way that puts less overall wear on said hardware. Sing Core panels are particularly great for pivot doors, as their lightweight and highly customizable nature means you can get nearly any door, and of nearly any size, while it remains light and easy to use. With Sing Core’s custom design capabilities, you can also create pivot doors that perfectly match the existing theme of your space, while still providing the functionality you need.

In hotels and other hospitality spaces, pivot doors can be used to create an impressive and memorable entrance. For example, a grand pivot door could be used to create a dramatic entrance to a hotel lobby or event space. Pivot doors can also be used to create privacy and separation within rooms, such as between a sleeping area and a living space, or between two office spaces. With Sing Core’s expertise in creating custom doors, you can create a one-of-a-kind entrance or room divider that will leave a lasting impression on guests.

Finally, pivot doors can be used in a variety of other commercial settings, such as museums, galleries, and retail spaces. In these settings, pivot doors can provide a clean and contemporary look that complements the existing décor while also providing a functional solution for separating spaces or creating an impressive entrance.

In conclusion, pivot doors are a versatile and stylish choice for a wide range of commercial applications. With Sing Core’s expertise in custom door design and manufacturing, you can create the perfect pivot door for your space, whether you’re looking for a grand entrance, a meeting room divider, or a sleek and modern look for your storefront. Contact Sing Core today to learn more about how we can help you create the perfect pivot door for your commercial building.

Ian Sage No Comments

Your Client Requested a Custom Door, Now What?

When an architect is tasked with designing a custom door for a project, there are a number of factors that must be considered in order to ensure that the end result is not only visually pleasing, but also functional and durable. One solution that has been gaining popularity among architects is the use of Sing Core in unique and custom door designs.

What is Sing Core?

Sing Core is a composite material that is made using our patented honeycomb core, resulting in a lightweight yet incredibly strong and stable material. It is particularly well-suited for use in door design due to its ability to resist warping, cracking, and other forms of damage that can be caused by environmental hazards and use.

When working with Sing Core, architects have a wide range of design options available to them. The material can be made to fit virtually any size or shape, and can be finished with a variety of materials and finishes to match the surrounding decor. Additionally, Sing Core is an environmentally friendly material, as it is made from sustainably harvested wood and does not contain any harmful chemicals or other elements.

How to Use Sing Core for Custom Doors

There are a number of ways in which an architect can incorporate Sing Core into a custom door design. For cases where a large, shaped, or abnormally scaled door is needed, you can simply provide those specifications to us during the order, and we’ll make the panel entirely custom for you. Or, if you need a high quality core to build your own custom design on top of, Sing Core works great for that as well. You can request a panel without a skin or finishing, allowing you to put your own artistry on it. You can also attach Sing Core panels together to create massive doors, should they be required. Either of these options result in a door that is both strong and visually appealing, with a high degree of customizability in terms of size, shape, and finish. There are also several optional features you can request when ordering a Sing Core panel.

Perks of Sing Core for Custom Doors

Regardless of the specific design approach chosen, the use of Sing Core in custom door design offers a number of benefits to architects and their clients. First and foremost, Sing Core doors are incredibly strong and durable, making them ideal for use in high-traffic areas or in locations where security is a concern. Additionally, the lightweight nature of Sing Core means that these doors can be easily installed and operated, reducing the risk of damage during the installation process or excess wear on the hardware.

Another benefit of using Sing Core in custom door design is its ability to resist warping and other forms of damage that can be caused by changes in temperature and humidity. This makes Sing Core doors ideal for use in areas with high levels of moisture or temperature fluctuations, such as bathrooms, kitchens, or areas exposed to direct sunlight. In fact, Sing Core is one of, if not the only product on the market that offers a 50 Year Guarantee against warping. That warranty also covers structural failure, so you can rest assured that this will last your client a very long time.

Conclusion

In conclusion, the use of Sing Core in custom door design offers architects a number of benefits, including strength, durability, and customizability. Whether used as a core material or as a veneer, Sing Core doors are an excellent choice for any project that requires a high degree of customization and durability. With their unique combination of strength, stability, and beauty, Sing Core doors are sure to be a popular choice among architects and their clients for years to come.

Ian Sage No Comments

Make Your Client Happy with Sing Core

As an architect, your goal is to create beautiful and functional spaces that meet the needs of your clients. You want your clients to be happy with the end result, and Sing Core can help you achieve that goal. Sing Core is a revolutionary building material that can be used to create lightweight, strong, and durable structures that are perfect for a wide range of applications.

Lightweight and Strong

One of the key benefits of Sing Core is its ability to reduce weight without sacrificing strength. This is particularly important when it comes to large structures such as doors, walls, and roofs. With Sing Core, you can create these structures in a way that will be lighter and easier to handle. This can be a huge benefit for clients who are concerned about the difficulty of installation and use.

Non-Warping Material

Another benefit of Sing Core is its ability to resist warping and twisting. This is particularly important for doors, which can warp over time due to changes in temperature and humidity. With Sing Core, you can create doors that are more stable and less prone to warping, plus each Sing Core panel comes with a 50 Year Warp-Free and Structural Guarantee. This can help to ensure that your clients are happy with the performance of their doors for the long term.

Wide Range of Applications

In addition to its strength and durability, Sing Core is also incredibly versatile. It can be used to create a wide range of structures, from doors and walls to roofs and furniture. This versatility makes it a great choice for architects who want to push the boundaries of what is possible with building materials. With Sing Core, you can create structures that are truly unique and that will stand out from the crowd.

Energy Efficient

Another benefit of Sing Core is its ability to improve energy efficiency. This is particularly important for clients who are concerned about the cost of heating and cooling their buildings. Sing Core has excellent insulation properties, which means it can help to keep buildings warmer in the winter and cooler in the summer. This can lead to significant cost savings over time, which can be a huge selling point for your clients.

Environmentally Friendly

Finally, Sing Core is a sustainable building material that can help architects to meet their clients’ environmental goals. Sing Core is made from renewable materials, such as wood and foam, and they are built to last a very long time. This renewable construction and long-lasting quality means that it is a more environmentally friendly choice than many other building materials, which can help to reduce your clients’ carbon footprint.

Conclusion

In conclusion, Sing Core is a versatile, lightweight, and durable building material that can help architects to create structures that meet the needs of their clients. With Sing Core, you can reduce weight without sacrificing strength, create structures that resist warping and twisting, and improve energy efficiency. Additionally, Sing Core is a sustainable building material that can help architects to meet their clients’ environmental goals. By using Sing Core in your designs, you can help to ensure that your clients are happy with the end result and that your projects stand out from the crowd.