singcoreadmin No Comments

Best Pivot Doors

How to Find the Best Pivot Doors

Whether you’re a home owner, project manager, architect, millwork or door company, you might like to find out how to get the best pivot door, especially if you’re going to spend $10,000 or more on your pivot door.

The only 50 year warp-free guarantee and full structure warranty

Best of the Best Pivot Doors

The best pivot door manufacturers, who provide the best pivot doors with the best pivot door warranties are able to provide their clients with the best pivot doors that can be guaranteed not to warp, bend, twist or otherwise fail for 50 years, if the pivot doors have patented Sing Core inside.
Door manufacturers can provide you with the best pivot doors, and this might be true, if their high end doors have Sing Core inside (and you can have your pivot door protected by our 50 year guarantee).

Check the Pivot Door Guarantee

High quality high end doors will come with a guarantee to ensure the customer’s satisfaction. Most large pivot doors do not come with a guarantee because they are problematic and have a high potential for warping, especially if the pivot door is an exterior pivot door.

You might be like to know what features to look for in the best pivot door, so that you can adequately determine what the best pivot door looks like and you can then review potential pivot door and made a decision based on your own due diligence.

In case you didn’t already know, it’s important to know how and why pivot doors fail.

Is your Pivot Door Likely to Fail?

Most pivot doors will fail doe to either the pivot door warping, or delaminating (structure). A composite pivot door (anything other than a heavy solid slab of flat material) will fail due to stress or environmental conditions. Any undue stress or strain on your pivot door, i.e. regular use straining both the hardware and the supporting structure (causing increased maintenance over time) or exposure due to unforeseen circumstances (like accident or abuse) may cause the door to fail or delaminate in response to impact.

What to look for in the best pivot door: Lightweight and structure warranty

Large Pivot Doors Are Prone to Failure

The Architectural Woodwork Institute issues and maintains minim requirements for warping doors which allows for up to ¼ inch of deflection or door warp over a 7 ft. span. Knowing that all doors warp, is helpful when reviewing your expectations in regards to pivot door warping. A warped door seven feet tall is likely to warp up to ¼ of an inch regularly, which is allowable in door warranties.

What to look for in the best pivot door: Oversized, large pivot door warranty

Exterior Pivot Doors Are Prone to Failure

Exterior pivot doors have a higher risk of failure due to door warp because one side (the inside) of the pivot door faces a temperature controlled interior space while the other side is exposed to the elements which cases the pivot door to move (warp, bend, twist, cup) resulting in pivot door failure. If a pivot door cannot freely swing or seal due to being warped, the may not be able to latch or operate as a door due to air leaks around the pivot door.

What to look for in the best pivot door: Exterior pivot door warranty

Why Pivot Doors Fail: 1. Door Warp, 2. Heavy Weight, 3. Structure Failure, 4: Size.

The characteristics you want to look for in the best pivot door include:

1. Warp-free, 2: Lightweight, 3: Structure Guarantee, 4: Available in any size, 5: Long life guarantee

So, if you know what you want in a pivot door, why not Google what you want and see what you get?

Google text: pivot door warp free lightweight structure guarantee long life Also see: Google Image Search
Google can be very helpful in helping you find the quality of pivot doors you are looking for.

We Do Not Have Pivot Doors for Sale

We do not have pivot doors for sale, because we do not make pivot doors. Our pivot door blanks are used by door manufacturers and millworks to build the best pivot doors. Our patented Sing Core is the only high precision pivot door blank material that can be guaranteed not warp or fail for 50 years.
You can have the best pivot door with the best 50 year pivot door guarantee just by contacting your favorite millwork, custom door manufacturer or door company and tell them what pivot door you want and ask for, “Sing Core inside.”

That’s what we do. We work with the best pivot door manufacturers to make the best pivot doors that have the best pivot door guarantee for 50 years, because your pivot doors have premium Sing Core inside.

That’s why the best contemporary architecture design specifies, “Sing Core inside,” in the most important high end projects, especially when there are large pivot doors requiring high performance expectations over time.

How to determine if Your Pivot Door is the Best of the Best?

1. Warp-free

See the minimum warp allowances for pivot doors below. Pivot doors made of patented Sing Core far exceed the warp resistance allowed by AWI standards. In fact, one of the largest high end door manufacturer comments, “We have not had a single door fail since we started using Sing Core door blanks.”
All the latest multi-million dollar homes are using large pivot doors in their contemporary architecture design. Please inquire with your favorite trade professional as to which pivot doors can be guaranteed to remain warp-free for more than one year. Patented premium Sing Core doors can be guaranteed to remain warp-free for 50 years.

2. Strength

Patented Sing Core is strong enough to withstand the impact of a sledge hammer without causing structural damage. See the unbreakable mirror test, which demonstrates a mirror backed by Sing Core which does not break under the direct impact of a 16 oz. hammer. Your high strength door with Sing Core inside will survive years of use and impact without distortion or structure failure. Patented premium Sing Core is fully structure guaranteed for 50 years.

3. Lightweight

Some of the largest pivot doors could weigh a ton in an attempt to obtain strength and warp resistance but not doors with Sing Core inside. Patented Sing Core weighs approximately 10% of solid wood, timber or plywood core. Products made with Sing Core are stronger than steel pound for pound. Lightweight pivot doors are safer for kids to operate, plus it costs less for hardware, transportation, handling and installation and will not sag after years of use.

4. Eco-friendly

The torsion box structure of patented Sing Core is responsibly and sustainably made using renewable vertical grain natural wood fiber which comes from nature, unlike other less strong core materials made of paper, aluminum or solid wood-based cores.

5. Insulation

Patented Sing Core is packed with insulation which imbues the pivot door with qualities such as climate control and sound deadening characteristics, which is even used in bullet proof and impact doors. High R value and STC rated* insulation material is also a key component in the solid composite substrate which helps to achieve the high performance standards of Sing Core.

“It would have not been possible if not for Sing Core.”

The unique patented vertical grain torsion box/insulation-packed composite substrate expands the possibilities of building materials, bringing the visions of architects and designers to life and is the only Eco-friendly product known with such lightweight (10% the weight of solid wood) high strength (660 PSI) ability to span long distances with little or no deflection, even under stress and strain over a long life of heavy use.

Ask your favorite architect, millwork or custom door manufacturer about Sing Core.

* Note: STC rating varies according to size, thickness, skin, and other factors. Sing Core does not rate doors, although we are fortunate enough to have one of the best sound testing labs in the world, here in the Pacific Northwest. If you require a specific STC rating, Sing Core can build a door to your architectural specifications and have the resulting door tested at our rating facility for an official rating.

 

singcoreadmin No Comments

Center for Architecture & Design – Seattle, Washington

In an effort to reach out the greater worldwide community from its headquarters in Seattle, SingCore has partnered with the American Institute of Architects (AIA) Seattle in the design and building of the new 4,500-square-foot Center for Architecture and Design in the National Building located at 1010 Western Avenue in Seattle, Washington.

SingCore is offering matching funds and donations to local AIA chapters to specify patented Sing products in the designs of their local center for architecture.

As a Platinum supporter, we’re excited to be providing CFAD Seattle and AIA Seattle with donations to raise the bar for architecture and design using patented Sing products for doors, walls and furniture for their center for architecture. We are currently in the process of similarly supporting the Austin Center for Architecture in Austin, Texas.

12′ x 10′ x 5″ Custom Pivot Doors

Four 12 ft. x 10 ft. x 5 inch SingCore panels were designed for CFAD Seattle as a jumbo pivot door that splits a conference room into two halfs. Each panel weighs about 500 pounds, which allows the door to move easily as shown below. Each door was installed in less than a half an hour.

huge extreme edge pivot doors in seattle center for architecture design sing core

FAIA Mr. Peterson is a senior architect for Suyama Peterson Deguchi (SPD) responsible for providing the solutions to build the multi-function 4800 sq. ft. space by creating a gallery that could be converted to a conference room within minutes to hold secure meetings within the center itself. It needs a special pivot door when it open it is a large gallery, when those 4 doors closed it become a conference room. All the furniture, work tables, islands and counter tops are quickly and easily assembled on site

About the large pivot door: Mr. Ric was able to accomplish the door solution by teaming up with inventor, Peter Sing, whose lightweight, high strength building material made it all possible without the use of heavy equipment, lifts and cranes. After being invited to join the project, Sing offered to supply not only the doors but almost the rest of all the office furniture, partitions and even part of the dining table/work table and cabinets in the lunge and office areas – all made of patented Sing panels, same core materials to build those 4 large pivot doors.

 

sing pivot doors in center for architecture design seattle with man doorsGreen building materials are the focus point of every architecture design now-a-days. As the home of the architect and design community for State of Washington, which is the leader in high tech and advanced materials playground for searching the planet for green, earth-friendly products is essential for this new home for all designers and architects.

In the temple of Seattle’s Center for Architecture & Design, the evergreen state sets the standard for promoting the highest standards of preserving our green earth among the Pacific Northwest architectural community while seeking out new ways to approach a more sustainable approach with building products that save energy and add longevity to the overall life of projects around our local communities and the world.

The idea of a local design center is not new, but the Seattle design center is the leading edge of this new technological approach to new office designs; bringing to life the idea of a multi-functional design combining office space, media, meeting and a gallery to promote green design permeating all areas of life and our society.

It all starts with the composer / architect of the project; with Ric Peterson’s design of Suyama Peterson Deguchi, while leading the team of the designer of the total project which includes a varied line up of suppliers, general manufacturers and fabricators to tackle the most challenging job to represent the state’s finest architects and designers. When all is said and done, the resulting space in this center represents the new philosophy and concept of engineering for a better world within the office space that has superior functionality as it is easy to maintain and built with the longest lasting building materials.

The symphony’s composer is Ric Peterson, FAIA of Suyama Peterson Deguchi was charged with the challenge of creating a design center work of art. The score is conducted by general contractor / conductor of the symphony, Krekow Jennings supervising all components while acquiring and arranging the performers (trade professionals such as sub contractors) participating in the creation of the newest chapter in executing the design by using green building materials made locally, produced with less energy and waste used throughout this project. The resulting masterpiece is a modern office, meeting room and gallery in a picturesque downtown location as a perfect showcase for professional trades and an inviting exposure to the general public. The whole job will not happen if without all the support from the donor of their trade skill to help such as painters did all the paint work for the furniture, and Schuchart/Dow craftsmen did all the assembly which basically started from patented Sing Panels, all in flat-pack which is easy and takes up less space for shipping to the job site avoiding damage during transport, and the end result is a new chapter of this ornate symphony of building art; simple, functional and elegant.

These unique large extreme edge pivot doors were manufactured in Washington state using patented Sing Core as the embedded structural core material. those door had added two more layers of material on the job site to create sound deadening and fire retardant features, Even with his lightweight, high strength core material, the wall feels as though it is made of solid stone, when you knock on it. Two of the doors feature a built in man door for simple access when the area is secured as a conference room. Four doors are easily 12 ft. x 10 ft. 2,000 pound pivot doors by the time completed provide the conversion from gallery to conference room quickly and easily.

About the furnishings, desks, tables and partition walls: Office area are also with totally new design approach with new leading edge patented lightweight , high strength eco friendly Sing panels. all those office furniture are assembly on the site by use patented Sing panels all flat pack after paint by painters and hand carry to the designer center, some shelf / table top and partition wall are over 12 ft. in length. Each of the panels are designed to be able to be carried by one person.

Assembling office furniture from sing modular panels lightweight high strength seattle center architecture designThe features of the office and lounge areas are simple but elegant in the functional execution of the artist’s design concept. All the furniture features adjustable legs to maintain work surfaces at high precision instrument grade levels. Up to 8 foot clear span work areas are neat and clean while keeping all power and other cords neatly hidden from view by an embedded wire management channel system that is an effective design component within the work areas. Single piece partitions that span up to 12 feet provide privacy and security while standing flawlessly amidst the efficiently accurate space.

Not resorting to raised level work areas provides an effective approach to cleaning and maintenance of the floor space that is both easy and saves time. all the wiring are hidden within the desk top and shelf channels, instead build raise floor as most commercial office space which takes more space and more assembly time and lose more precious space.

Completing the symphonic work, Sing and his patented product “Sing Core” is joining the team of suppliers that is bringing the dream of Seattle’s design symphony to life.

Hearing about this project might cause you to wonder how an entire facility of this magnitude could be quickly and easily assembled out of multiple integrated modular panels. This is the first time such a grandiose project has been built completely of lightweight high strength panels that are not only sound deadening but are resistant to warp, bend or twist, even while covering long spans and featuring natural wood surfaces.

Thanks to Sing’s lightweight material, it took less than 2 hours to unload and install those huge pivot doors (weighing-in at only 500 lbs.) and three craftsmen assembled and installed all the office and lounge components and furniture. Sing Core it the new Eco-friendly building material that has helped to create the strongest most lightweight office furniture ever invented in the world, creating endless possibilities to provide architects, engineers and designers the ability to provide sustainable long-life office furniture and so much more…

The advantage Sing office furniture which furnish almost the entire design center space

1 Easy to clean floors (less table legs shelf supports to interrupt the cleaning process).
2 Easy wiring management (all wires are hidden in the channel between the partition wall and desk top).
3 Some areas designed with clear span of 10 ft. plus (the shelf top and the table top are at same level) providing more working surface and elegant work space.
4 Partition walls are made of a single piece large panel (without joining to separate entire work station, offers more privacy yet simple, elegant and functional).
5 Easy to assemble on the job site (entire office lounge area constructed of Sing Panels (each piece of furniture is flat packed and installed by Schuchart/Dow).

The advantage of pivot door / partition wall

1 Change the conference room to gallery within minutes.
2 Fire proof and sound deadening patented Sing pivoted door.
3 Man door on both sides of the entrance for easy access.
4 The lightweight and strength of Sing pivot doors enabled designers to add 1,500 lbs. of additional material without compromise.

See also: Seattle Center for Architecture & Design

Seattle architects are renowned for their commitment to green building, energy efficiency and innovation. In the next few days, the new Center for Architecture & Design in Seattle will be featuring the newest revolution in green building products in their facility further promoting environmental awareness throughout the Pacific Northwest and the world.

Center for Architecture and Design Seattle Under Construction

Patented Sing Core® is delivering 4 large pivot doors, all the office furniture, furnishing the lounge and lunchroom which covers most of the space in the design center.

Center for architecture design seattle adding large pivot doors 1234

Example: Sing Core is providing a door panel for a large pivot door measuring 12 ft. x 10 ft. x 3.5 inches thick that weighs a mere 500 lbs. plus the added benefits that come along with using the most Eco-friendly non-warping material ever invented.

Large extreme edge pivot swing doors with man door Center for Architecture Design Seattle singcore

4 men installed these large pivot doors in less than 2 hours

 

Large modern pivot doors with man door lightweight high strength Seattle center Large extreme edge pivot doors lighweight high strength guaranteed non warping

 

Four of these high performance pivot doors will swing open by an extreme edge pivot (a challenge solved with Sing Core) to reveal a large, expansive hallway; when closed will create a quiet, cozy conference room. These engineered pivot doors will be fully insulated, fire-rated, sound-deadening and guaranteed non-warp for 50 years.

All the office desks, shelves, partition walls, tables, wall cabinets and other casework are made of Sing Panels. Some tabletop/shelves are one 33 ft. piece in length and designed for easy assembly on the job site.

Sing Core is proud to support the Center for Architecture & Design in Seattle by contributing by donation and promoting sustainability and education in true green design and architectural materials.

 

Sing Core is proud to be supporting the artistic architectural industry in Seattle, Washington. The Pacific Northwest is a hotbed for leading edge architectural designs and architectural building products. In an effort to reach out the greater worldwide community from its headquarters in Seattle, Sing Core is partnering with the American Institute of Architects (AIA) Seattle in the design and building of the new 4,500-square-foot Center for Architecture and Design in the National Building located at 1010 Western Avenue in Seattle, Washington.

Center for Architecture Design Seattle Under Construction

Proud to be the newest Eco-friendly architectural building product that is more lightweight and stronger than other traditional building products, Sing Core is a part of this forward thinking movement that is creating an advanced attitude that embraces high tech while maintaining a green perspective.

To help support the efforts of all progressive architects and designers in the Northwest, Sing Core has donated $36,000 in its patented Eco-friendly architectural building materials thus far.

We are honored to be joining forces with Suyama Peterson Deguchi, Krekow Jennings and OAC Services. Seattle Architecture Foundation, Design in Public and AIA Washington Council will also be joining the project later this year.

 

singcoreadmin No Comments

Architectural Specification Substitutes

Due to being the newly invented and possibly the most significant improvement in building materials in the last century, it is not uncommon to see Sing products recommended as substitutes for products in the original specifications initially specified by architects. Even though Sing Core is new, we are not that new and have years of experience to assure or most demanding clients that they only deliver the best to their clients.

Why would you substitute Sing Core?

Eco-friendly

Lightweight high strength torsion box foam core varuiety of thicknesses and wood speciesIn this day and age, it is of primary importance to take into consideration that the impact of your project will have on the earth. Everything we do to help preserve our precious planet is a step toward providing a better world for all life for generations to come. Sing Core’s true green technology is a huge step toward responsible sustainability.

Lightweight

One of important advantages of sing Core is its lightweightedness when compared to other building products. Other traditional building components that can even come close to matching the lightweight characteristics of Sing Core are extremely weak and have little or no structural integrity. This might be acceptable for visual representation upon installation, but may deteriorate rapidly over time, something that you might need to consider in the design process.

Extremely High Strength

Sing Core is super strong, so strong, in fact, that independently tested results from the University of Washington revealed a PSI of 660-to-over-1,100 pounds per square inch of compression strength, which is stronger than steel pound for pound. This is why you see Sing Core substituted in extreme weather, under heavy loads, maintain strength over long spans, blast and bullet proof applications.

True Flat

KONICA MINOLTA DIGITAL CAMERAPrior to the invention of Sing Core it was nearly impossible – or extremely expensive and laborious – to build a true flat door (or any other surface desired to be flat over a long span with little or no framing). In fact, current regulations for flatness allow for a ¼” of deflection over a 6 foot span. Sing Core outperforms any other material and can be combined with wood and other products and still be guaranteed true flat.

Inexpensive

You might be surprised that a building material that is made in the USA cost much less than other composite materials and is so affordable, that it is not priced much more than particle board and can end up being much more inexpensive especially when you factor-in savings in shipping, handling, installation and maintenance costs.

Guaranteed for Life

Sing Core is such a structurally sound building material that it is possibly the only material that can be guaranteed for life, but is designed and built to last for centuries, with little or no deterioration over time, when product is used as specified. When product is properly matched to application, sing Core will not warp, bend, twist or rot, like other materials.

And that only comprises the top half-dozen reasons that people are switching to Sing Core.

As the project owner, you may have just found us on the Internet and want to see Sing Core featured in your project due to all the added benefits. We work hand-in-hand with designers, architects, contractors and homeowners to make sure that you have the right Sing products to match your requirements and specifications. This makes the job safer and more efficient for your general contractor and your architect will thank you for being diligent and for introducing them to Sing Core which they will continue to include in future designs.

How to Specify Sing Core Inside Your Doors

When specifying Sing Core inside your doors, you can specify “Sing Core” as the manufacturer but note that the doors will need to be finished by a millwork or custom door manufacturer. This about how this might impact the price (important for contractor during price estimations). It would also be helpful to also specify weight ratio of “3 to 4 pounds per square foot” and “50 year warp-free guarantee,” to prevent substitution by the contractor. You don’t want your client to end up with a substituted non-Sing door and be unaware of it until it warps later (see example).

Does Your Door Have Sing Core Inside?

If your door has Sing Core inside it can come with a full 50-year warp-free guarantee. No other door can be guaranteed like that, unless it has Sing Core inside.

It is rare, but there have been occasions when a door has warped, when someone thought it had Sing Core inside, but it did not.

For instance, last year, an architect in Florida specified a large wooden door with Sing Core inside. The contractor contacted Sing Core and received an initial price quote.

Nine months later, we received a call from the architect who had been contacted by the building department that reported that a large wooden door with Sing Core inside had warped.

We searched our records and could not find any record of the job. We did discover the initial price quote request from the contractor who must have found a different way to make the large door.

Your large door with Sing Core inside comes with a certificate of authenticity and guarantee.

Be forewarned, if your large wooden door doesn’t have Sing Core inside, you can expect it to warp.

Make sure your large doors have Sing Core inside.

Not Just for Doors

true-flat-doors-in-quantity-fast-delivery-coast-to-coast-compareCertainly, we are best known for our door applications, and for many years, people thought of us as a door company because of how superior this material is in that specific application. While we have established ourselves as the perfect door builders – especially when addressing challenging door specifications for oversize, sliding or hinged applications – Sing Core has nearly limitless applications and is featured in many of the most high-end homes. We are the only door that can be guaranteed even after being exposed to weather conditions and no other wood door can be guaranteed true flat.

Rarely does a day go by where we don’t see someone versed in contemporary architecture design who reaches out to Sing Core to solve another issue of strength vs. weight, saving economically by reducing shipping, handling, installation, repair and maintenance costs, and upgrading the overall green value of a project.

If you have just discovered Sing Core, it is not too late to substitute sing products for the traditional products that were originally specified by your architect. We work with architects and designers to make sure that you have the right sing product to match your specifications, meeting (or exceeding) any expectations that you might have.

We can help you with the substitution submittal process and we have staff on-hand with the experience to make sure that your needs are met or exceeded, and the results can be guaranteed for life (per warranty certificate accompanying your guaranteed Sing product).

If you are like many of our users, you will find that once you discover Sing Core, you will start finding solutions to your dreams and ideas that may have been limited by available building materials of the past.

Join the revolution and see our clients list to see some of the most successful business staying on the leading edge of building technologies by embracing the Sing Core advantage.

singcoreadmin No Comments

Sing Along With American Made Lightweight Tables

Sing Along With American Made Lightweight Tables

By Damon Marturion

Using Sing Core technology, the structural integrity of any table can be magnified exponentially while remaining extremely lightweight.

Inventor, Peter Sing, says, “There is nothing like this in the world that is eco-friendly lightweight, strong and stronger than titanium; plus,” says Sing, “We help put American craftsmen back to work building products that are handmade in the USA and will last the test of time, while making the world a better place.”

I met with Mr. Sing in his international headquarters in McCleary, Washington. Many emerging technologies have been birthed in the Pacific Northwest and Sing’s, patented “Sing Core” is destined to provide a natural and bio-friendly alternative to existing building materials.

One of Peter Sing's Sing Core Tables

Mr. Sing gave me a tour through his warehouse where I viewed a variety of table designs. They covered the entire spectrum from industrial work-tables, to kitchen tables, desktop and coffee-tables. Pretty much, any kind of table you could think of.

Of course, Mr. Sing is enthusiastic about his own products but he really got my attention when he lifted the whole end of an eight foot table with one finger. I thought, “That doesn’t make sense… How’d he do that?” as if it were been some parlor-trick or something… Then he challenges me to try it… and sure enough, it was so lightweight that I could duplicate the demonstration with one finger.

Mr. Sing claimed that though extremely lightweight, that his sing core was stronger than titanium. Sing explains, “Compared to an average size of grid for honeycomb core made of aluminum, titanium and plastic that are less than 1/2 inches, keeping an adequate strength is an issue. Sing core’s internal structure is made of renewable natural wood veneer that is so strong that 2 x 2 inch grids of sing core reached 660 psi when tested by UW Civil Engineering Lab, proving that it is stronger than almost any available honeycomb core.” I thought this was an optimistic appraisal, until he crawled onto this 8 foot table that was only one-inch thick and laid on it as if he was going to take a nap. Then he asked me if I could witness any visible bowing of the table top beneath him. Sure enough, to my naked eye, the table top was perfectly straight.

Not being an engineer, I could not explain what my eyes were seeing, but it confused my reality of what seemed possible and/or my interpretation of the laws of physics as I understood them.

One of Peter Sing's Sing Core Collapsible Tables

Getting off of the table, he explained to me that while I was looking at tables covered in a variety of material, like Formica (HPL), natural woods and metal; his technology could be applied to any covering resulting in a lightweight, strong and long-lasting end product using no melamine or particle board. Examples included any surface material, “Like any kind of wood product, concrete, any stone – like granite – for instance, acrylics, glass, or even Kevlar for bullet-proof solutions.”

“Try to bend it,” Mr. Sing encourages me to bang, press and sit on the table to challenge its structural integrity, “You can’t. It’s too strong.”

Then turning his hand from horizontal to vertical, he said, “And any table top you see here can be turned to stand, like this, and it becomes a door,” with the same properties, just different hardware and packaging, “or any other thing. It’s the same core material.”

Mr. Sing said that his manufacturing facility was most famous for providing lightweight and “true flat” solutions for oversize doors. He said that this is a common problem for designers and architects as, “The reason most wood products fail is due to warping, twisting and cupping.

As we walked through a maze of assorted furniture, it was obvious to me that Peter Sing’s sing core could be used in nearly any consumer product, as well as structural applications; everything from cutting boards to bridges.

Then he hit me with his philanthropic dream of making the world a better place by putting the power of product design and manufacturing back in the hands of the average American who has (at least) basic woodworking skills. Sing says this is a, “New miracle revolution of true green technology.”

Lightweight-University_Logo

To this end, Mr. Sing has launched his, “Lightweight University,” where he trains and certifies pioneers (anyone from one-man operations to large, corporate manufacturing facilities) in the practical use of his sing core. He went on to say, “Every student, every draftsman, artist, designer or housewife can use sing core to create thousands of product applications if they attend Lightweight University , at least they could benefit by using products made of sing core in their daily lives.”

“Anyone can design,” sing core products, according to Sing. When people come to him with ideas, he empowers them with his technology, allowing them to create things that have never existed before; and if they so desire, supports them as they manufacture their designs and gain market share via Lightweight University (LWU).

Inventor, Peter Sing, says, “This should be in every house in America,” encouraging everyone to, “spread the news… tell your family and friends,” about sing core and his desire to put the power of manufacturing back, “in the hands of American craftsmen,” who can create high-quality, handmade creations that will last for lifetimes, while still being economical enough to compete with cheap (disposable) imports; returning pride to the phrase, “Made in the USA.”

For more information, contact:

Peter Sing at Sing Core, P.O. Box 1691, McCleary, WA 98557 (360) 495-3577